Oneway Wolverine Grinding Jig with Quad Setup Jig for Sharpening Workshop Tools • Woodturning Gouges • Chisels…

Amazon.com Price: £113.21 (as of 08/08/2022 21:27 PST- Details)

The Oneway Wolverine Grinding Jig is the core component of the Oneway Wolverine line of grinding products. Producing razor sharp tools and finely finished bevels has moved from an art into a science. Owning the Wolverine Grinding Jig will ultimately save you time, frustration and money.
The Oneway Wolverine Grinding Jig is the core component of the Oneway Wolverine line of grinding products. Producing razor sharp tools and finely finished bevels has moved from an art into a science. Owning the Wolverine Grinding Jig will ultimately save you time, frustration and money.
The included Quad Setup Jig helps you correctly set the proper grinding angles for Roughing Gouges at 45 deg, Parting Tools at 30-60 deg, Skews at 21.5-43 deg and Bowl Scrapers at 8 deg. Its called the “Quad Setting Jig” since one jig sets the correct angles for all 4 of the other HSS woodturning lathe tools. The Quad Setting Jig is designed to be used with 8” bench grinders.

The Oneway Wolverine Grinding Jig is the core component of the Oneway Wolverine line of grinding products. Producing razor sharp tools and finely finished bevels has moved from an art into a science. Owning the Wolverine Grinding Jig will ultimately save you time, frustration and money.
The Oneway Wolverine Grinding Jig is the core component of the Oneway Wolverine line of grinding products. Producing razor sharp tools and finely finished bevels has moved from an art into a science. Owning the Wolverine Grinding Jig will ultimately save you time, frustration and money.
The included Quad Setup Jig helps you correctly set the proper grinding angles for Roughing Gouges at 45 deg, Parting Tools at 30-60 deg, Skews at 21.5-43 deg and Bowl Scrapers at 8 deg. Its called the “Quad Setting Jig” since one jig sets the correct angles for all 4 of the other HSS woodturning lathe tools. The Quad Setting Jig is designed to be used with 8” bench grinders.
Carpenter chisels up to 1-1/4″ wide can be sharpened using the Wolverine’s Vee-Arm. The arm is adjusted to set the bevel, and the chisel can be ground with small sideways motions and light cutting pressure. Three or four strokes on a strop will generate a razor sharp edge. The Wolverine Grinding Jig comes with a 3 x 5 inch adjustable platform which allows even large scrapers to be ground with ease.
Parting tools are sharpened using the platform. Laying it flat on its side on the platform gives a slight hollow grind which is very desirable for clean parting. The Wolverine’s Vee arm can be used to sharpen skews, but a far superior method is ONEWAY’s Skew Grinding Attachment (not included). With a finely dressed 80 or 120 grit wheel, even very small carving tools can be superbly ground using the standard Vee-Arm.

Brand

Manufacturer

Binding

Product Group

EANs

UPCs

Part Number

Model

Height

Length

Weight

Width

Shopping Cart